JHPK-WL2 High Pressure Micro-Perfusion System

1. Design and production with the complete independent intellectual property rights, several key techniques have applied national patents.

2. High pressure L type perfusion gun with specialized ultra small flow can meet the demand for manufacturing the small products. 

3. It can meet the requirement of environmental protection with high pressure impinging mixing and mechanical cleaning without detergent.

4. The special protection liquid circulation system of material pump completely solves the problem of easy crystallization and sensitive to air for raw material during their application.

5. Special thermo-stated container keeps the raw material at the set temperature.

6. The realization of system fine adjustable control is obtained with the low pressure circulating reflux at gun shutting down and high pressure material discharging control at gun starting. And the requirement for energy and power saving is achieved to a great extent.

7. The design of multi-formula setting and memory function makes the system more suitable for continuous production with multi-station and multi-product. The system realizes auto material feeding and alarm when material lacking.

8. The oil tank can be vacuumed and suitable for different materials.

9. The application of the easy man-machine interact operation system makes the whole system having multi-point control and feedback and having the function of auto fault prompting and alarming. It is more convenient and easy in maintenance and operation.

Technical parameter instruction:

Raw material ratio: 1:1～1:5 (accurate variable ratio)

Raw material viscosity: 200～5000cps (under operation temperature)

System flow rate: 500～4000g/min (accurate discharging)

Power:  three phases 380V/50HZ/15KW (without tracing band)

Raw material heating power of main machine: 3000Wx2

Heating power of piping insulation: 800W

Volume for single material tank: 45L/65L (customizable)

Formula of perfusion program: 40 groups

Driving pressure of hydraulic station: ≤21Mpa (3000psi)

Heating temperature range of material tank: 0℃～90℃

Air pressure: 0.6～0.8Mpa (0.6M3/min)

Material feeding type: feeding with membrane pump

Function of perfusion gun: High pressure L impinging mixing, mechanical self cleaning

Pressure of vacuum pump: -0.1Mpa  

System Configuration:

Main machine: 1 set

Supporting L type perfusion gun: 1 piece

Membrane pump for material feeding: 2 sets

Piping assembly: 1 set

Vacuum pump and buffer tank: 1set

Gun connecting pipe: 1 group

Hydraulic system: 1 set

High accuracy dosage pump: 2 sets

Auto material feeding system: 2 sets

Raw material stirring system: 2 sets

Dimension: 1600mmx1150mmx2700mm (LxWxH)

Weight: 750KG