Two-Component Variable Ratio Metering System JHPK-HY3

对比

编号 :

EH060091

Product
description

产品描述

- Commodity name: Two-Component Variable Ratio Metering System JHPK-HY3
- Commodity ID: EH060091
JHPK-HY3 Equipment Manual
System Configuration:
System Host: 1 unit
Includes material pump system, cleaning pump system, dual-component feeding system, and control
system;
(Dual-component feeding system comprises: A/B material tanks, 2 mixers,
2 filters, 2 air purifiers, and associated valve fittings)
Feed Pumps: 2 units (diaphragm pumps) with 3-meter feed lines
Matching Injection Gun: 1 unit
Gun Operation Cart: 1 unit
Insulated Pipe Assembly: 1 set (8 meters)
Vacuum Pump & Vacuum Tank: 1 set each
Matching Auxiliary Pipe Fittings: 1 set
Low-Temperature Circulator: 1 unit
2.2 Raw Material Ratio and Flow Rate:
System-limited input flow rate range: 20~2400 g/min
System-limited input ratio range: 20~100
System-limited input density range: 0.5~2.0 g/ml
System-limited input correction parameter range: 0.8~1.2
2.3 Technical Parameter Notes:
When setting parameters, the flow rate, ratio, and density parameters must all be satisfied in
conjunction for normal operation. Otherwise, the flow rate or ratio parameter must be reset to clear the
alarm before normal operation can resume.Raw Material Viscosity Range: 200~1000CPS (at operating temperature)
Air Supply Pressure: 0.5~0.8Mpa (70~120psi) ≥0.8m³/min
System power requirements: Three-phase five-wire 380V 50Hz 15A×3
Heating range: 25℃~55℃ (recommended)
Insulated hose length: 8m
System material pressure: ≤5.0MPa (710 psi)
Cleaning Pump System Pressure: ≤0.8 MPa (120 psi)
Filling Gun Function: Pneumatic, push-button control switch, automatic backflow upon gun stop
Filling Gun Mixing Method: Initial collision + static mixer
Filling Gun Air Inlet Pressure: 0.5~0.8 MPa (70~120 psi)
Air hose size: φ8×1
Gun working flow rate: 0~8 kg/min
Gun cleaning method: Cleaning fluid wash + air purge sequential combination (or select single
cleaning method)